Sunday, September 23, 2018

Technical Education and Skills Development Authority (TESDA) to Train Banaybanay Citizens

The Local Government Unit (LGU) of Banaybanay, Province of Davao Oriental, has tapped the Technical Education and Skills Development Authority (TESDA) to train its citizens for the construction of a 1,500-hectare eco-industrial park.

"Banaybanay LGU wants its people to be the ones to work and benefit from the construction. We will train the applicants and provide them with various construction-related courses," TESDA-11 Regional Director Lorenzo Macapili said.
He continued that TESDA initially targets to train 100 trainers for this project, and might eventually add the trainers via the agency's "train the trainers" approach.
"The (Banaybanay) LGU said the project would need 5,000-10,000 construction workers. But that doesn't mean 5,000 'at one-shot'. Getting the workers would be gradual," Macapili clarified.
The regional director said the Banaybanay town government would like to hire its residents for this project, and it would also hire those from adjacent municipalities.
"So, if there are many IPs (indigenous people) in one municipality, for instance, they would also learn from us," Macapili said.
Macapili said the construction industry in Davao Oriental would provide on-site training for the applicants or trainees.

Davao Oriental Eco-Industrial Park Updates: Relocation of Affected Banaybanay Residents

Affected residents of Banaybanay by the Davao Oriental Eco-Industrial Park will be relocated to an elegant and sustainable community. 

Share and follow the Davao Oriental Eco Industrial Park Facebook Page for more updates.

Monday, September 10, 2018

What is a Cement Plant?

The cement industry is highly affected by increased energy prices and CO2 penalties. The need for adaptation to a more environmentally friendly, and cost effective, energy solution is urgent in the increasingly competitive global market.
 
In cement plants, generic measures like preventive maintenance, use of efficient motors, efficient and variable speed drives, proper insulation, optimization of compressor and lighting systems can help reduce energy consumption.   
 

Cement Kilns


Cement kilns are used for the pyroprocessing stage of manufacture of Portland and other types of hydraulic cement, in which calcium carbonate reacts with silica-bearing minerals to form a mixture of calcium silicates. 

Over a billion tonnes of cement are made per year, and cement kilns are the heart of this production process: their capacity usually defines the capacity of the cement plant. 
 

Manufacturing of Cement

 

Cement is manufactured through a closely controlled chemical combination of calcium, silicon, aluminum, iron and other ingredients.

Common materials used to manufacture cement include limestone, shells, and chalk or marl combined with shale, clay, slate, blast furnace slag, silica sand, and iron ore. 

These ingredients, when heated at high temperatures form a rock-like substance that is ground into the fine powder that we commonly think of as cement.

The most common way to manufacture portland cement is through a dry method.



Dry process

In the dry process, the raw materials are dried in a combined drying and grinding plant to reduce the moisture content below 1%. The materials are ground in either a ball or a roller mill with drying of the materials being achieved by sweeping the mill with the exhaust gases from the kiln. 

The drying capacity of the raw grinding system may be supplemented by auxiliary hot air generating furnaces. The dried, finely ground raw mix powder is then blended and homogenised in silos with the mixing being provided by compressed air.

The blended and homogenised raw mix is then usually fed to a gas-suspension preheater ahead of a short rotary kiln. These preheaters consist of successive heat exchanger and collection cyclone stages arranged above one-another in series in a tower. 

Partial calcination of the raw mix takes place prior to the mix entering the rotary section of the kiln.

Additionally a precalciner can be integrated between the kiln and the suspension preheater which ensures complete calcining of the raw mix before it enters the kiln. Precalciners increase kiln capacity and reduce energy consumption.
Fuel consumption is lowest in this process and is in the range of 2750-4000 kJ/kg of clinker. 

The power consumption is in the range of 120-125 kWh/tonne of cement (Chemical Universe, 2007). However, the most modern, dry-process cement plants can have power consumption in the range 80-100 kWh/tonne of cement by deployment of compression grinding equipment for raw and finish milling rather than ball mills. 

Production of blended cements is also widely used to reduce unit electrical energy consumption

Although the dry process is the most modern and popular way to manufacture cement, some kilns in the United States use a wet process. 


Wet Process

In the wet process the preparation of the raw mix is achieved by grinding the dry raw materials with water in wash mills, or ball mills with rubber linings. The resultant slurry is mixed in slurry basins where compressed air is introduced and the slurry is continuously stirred to produce a slurry of consistent composition.

In the conventional wet process this thick liquid slurry, which may have water content of 30-40%, is fed directly into the kiln where the water is evaporated in the drying zone at the kiln inlet. 

This drying zone is fitted with curtains of chains which promote heat exchange between the slurry and the exhaust gases from the combustion of fuel in the kiln passing counter-current with the slurry feed up the kiln.

After passing through the drying zone the raw material moves down the kiln through the preheating zone to be calcined and finally burnt to clinker in the sintering zone. 

Conventional wet kiln technology has a high heat consumption and produces large volumes of exhaust gases. 

In more modern wet kiln systems water is driven off the raw slurry prior to entering the kiln in a slurry drier. 

Slurry “thinning” chemicals may be added to allow the slurry to be pumped to the kiln with lower water content. 

These more modern wet kiln systems have lower specific heat consumption compared to conventional wet kilns.